Factoy all menu code televisi

Television Service
Menu Codes Have you ever
needed to
access the service menu
on your TV for something
as simple as enabling a HDMI port? You take the
time to call the manufacturer
just to hear
a bunch of garbage about
how you need to "call a
qualified service technician for that". Well, I
and many others have been in
this same situation
which is sort of lame since
you OWN the TV in the first
place and should be able to enable/disable or
screw up whatever settings
you want. Note: If
you do not know what
you are doing in the
service menu, you can screw up your TV. In any
case, here are a list of service
menu codes/
procedures so YOU too
can enable your HDMI
ports. (Philips...what were you thinking!) Vizio With
power off, hold Ch UP
and Ch Down together for
10 seconds.
While still holding Ch up
and down together, push power, then let go. Select OSD
button, there
should be a letter in the
lower right hand corner of
the menu.
Then hold OSD and Mute/ Exit buttons together until
factory menu comes up.
Make adjustments with
remote, select exit, then
turn off power to save the
adjustments. Hitachi RPTVs : F59 SERIES * Press and hold the
{MENU} button on the TV.
* Then press the {MENU}
{8} {SELECT} buttons on
the remote.
* To exit, press the {MENU} button on the TV or
the {EXIT} button on the
remote control. DCAM Mode: *
Using the remote
control:
* Hold down the {TV} button.
* Press the {MENU} button.
* Press the {INFO} button. *
Release the {TV} button.
* Remote Control Key
Functions When In DCAM Mode: {INPUT} ............. Blue
(13x9 adjust)
{ASPECT} ............ ROM Write
{DAY/NIGHT} ......... ROM
Read
{MENU} .............. Remove Color {EXIT} .............. Cross
Hatch/Video Mode
{INFO} .............. Green
{GUIDE} ............. Calculation
{2} ................. Cursor UP
{5} ................. Cursor DOWN {6} ................. Cursor RIGHT
{4} ................. Cursor LEFT
{0} ................. RED (7x5
Adjust)
{STOP} .............. Initialize
{PLAY} .............. Raster Position
{FAST FORWARD} ......
Phase To Exit The DCAM Mode:
* Press and hold the {TV}
button.
* Press the {0} button. * Press the {1} button.
* Release the {TV} button.
HITACHI PROJECTORS : * Press
the {MENU} &
{RESET} buttons and then
press the {RESET} button again
and hold it for at least 5
seconds. * The Service Menu
will be
displayed.
* To exit, turn the Projector Off. HITACHI MISC : 1.
* Turn the TV on.
* Press the {MENU} {MENU}
{8} {SELECT} buttons on
the remote.
* The Service Menu will be displayed.
* Use the {UP} {DOWN}
buttons to select items.
* Use the {LEFT} {RIGHT} to
change the data.
* Press the {EXIT} button to exit the Service Menu. 2.
* Turn the TV off.
* Press and hold the
{INPUT} button on the TV
then press {POWER}.
* Hold both buttons until the TV powers on
with the Service Menu
displayed.
* Use the {UP} {DOWN}
buttons to select items.
* Use the {LEFT} {RIGHT} to change the data.
* Press the {EXIT} button
to exit the Service Menu. 3.
* Turn the TV off.
* Press {POWER} & {INPUT}
buttons on the TV for more than 3 sec.
* The Service Menu will be
displayed.
* The letter "P" indicates
picture and "A" indicates
audio. * Use the {UP} {DOWN}
buttons to select items. * Use
the {LEFT} {RIGHT} to
change the data.
* Press the {EXIT} key to
exit the Service Menu. JVC 1. -Press the {MENU} button
and go to the User Menu
screen, make sure
that the indicator (arrow)
is pointed and highlights the
"Picture Control". - The buttons on top of
the remote are set to TV &
VCR respectively. - Set sleep
timer to "0"
minutes and while it is
displayed, simultaneously press the {VIDEO STATUS}
& {DISPLAY} buttons. - The
main service menu
will be displayed with
choices #1 through #9.
- Press one of the corresponding number
keys to enter that menu. - Use
the {CH+} {CH-}
buttons to navigate within
a menu.
- Use the {VOL+} {VOL-} buttons to change the
values. - Use the {MUTING}
button
to memorize the changed
value.
- Use the {BACK} button to exit the service menu. 2.
Turn the TV on.
Using the remote control: -
Press the {INFO} &
{MUTE} buttons at the
same time. - The Service Menu will be
displayed - Use the number
keys to
select the category.
- Use the {VOL+} {VOL-}
buttons to enter the category.
NOTE: Some models don't have
category selection.
- Use the {CH+} {CH-)
buttons to select item to
be adjusted. - Use the {VOL+} {VOL-}
buttons to change values. -
Press the
{INFORMATION} button to
exit. 3.
Turn the TV on. Using the remote control: #
Press {DISPLAY} & {PIC
MODE} buttons at the same
time.
# The Service Menu will be
displayed # Use the number keys to
select the category.
# Use the {UP} {DOWN}
buttons to enter a
category.
# Use the {LEFT} {RIGHT} buttons to select items.
# Use the {UP} {DOWN}
buttons to change values.
# Press the {DISPLAY}
button twice to exit. 4.
# Press the {MENU} button. # Select "Clock Set".
# Set clock to 3:21 AM and
press "Start Clock".
# While a "Thank You"
message is displayed on
screen, press the {MUTE} and {MENU} buttons.
# The Service Menu will
come up.
# Use {UP} {DOWN} to select
items.
# Use {LEFT} {RIGHT} to change values.
# To exit, turn the TV Off.
MITSUBISHI 1. # Using the
remote
control press:
{MENU} {0} {3} {5} {3} buttons.
{MENU} {0} {3} {5} {7}
buttons. # Then use {VIDEO} or
{AUDIO} buttons to enter
two different groups of
adjustments. # {VIDEO} and {AUDIO}
steps along through the
adjustments, and {+} {-}
does the adjusting.
# Press the {ENTER}
button to save the change.
# Press the {MENU} button
twice to exit service menu. 2.
# Using the remote
control press:
{MENU} {1} {2} {5} {7} buttons.
{MENU} {1} {2} {5} {9} buttons.
{MENU} {1} {3} {7} {0}
buttons. # Then use {VIDEO} or
{AUDIO} buttons to enter
two different groups of adjustments.
# {VIDEO} and {AUDIO}
steps along through the
adjustments, and {+} {-}
does the adjusting.
# Press the {ENTER} button to save the
change.
# Press the {MENU} button
twice to exit service menu 3.
Using the remote control
press: {MENU} {2} {3} {5} {6} buttons.
{MENU} {2} {3} {5} {7}
buttons.
{MENU} {2} {3} {5} {8}
buttons. {MENU} {2} {3} {5} {9}
buttons. * Then use {VIDEO} or {AUDIO} buttons to enter
two different groups of
adjustments.
* {VIDEO} and {AUDIO}
steps along through the
adjustments, and {+} {-} does the adjusting.
* Press the {ENTER} button
to save the change.
* Press the {MENU} button
twice to exit service menu. 4.
# Using the remote control press:
{MENU} {8} {2} {5} {7}
buttons. # Then use {VIDEO} or
{AUDIO} buttons to enter
two different groups of
adjustments. # {VIDEO} and {AUDIO}
steps along through the
adjustments, and {+} {-}
does the adjusting.
# Press the {ENTER}
button to save the change.
# Press the {MENU} button
twice to exit service menu. Mits
VZ8 chassis Menus
Option menu, Menu 1270
Service Menu, Menu 1257 Convergence Menu, Menu
1259, 4 Fine,
5 Coarse, 6 Misc. PANASONIC
Panasonic TV's after 1996
can be set to "Serviceman
Mode" with the following remote control
sequence: -select the SET-UP
icon and
select CABLE mode.
-select the TIMER icon and
set the SLEEP timer for 30 minutes.
-press the ACTION button twice
to get out of the
menus.
-change to channel 124.
-adjust the volume to minimum (0).
-Hit the VOL down button on
the TV itself (not on
the remote) and a red
"CHK" should appear in
the upper corner. -press the ACTION and
VOLUME DOWN buttons (again,
on the
TV, not the remote) you
will toggle between
AGING and SERVICEMAN modes. Select Serviceman
mode.
The POWER button on the
remote control will
select one of the five
Serviceman Adjustment modes. The modes are: B -
Serviceman VCJ SUB
Adjustments. These
include sub-tint,
sub-color, sub-brightness,
sub-contrast, colorkiller/ ABL/gamma, audio and video
adjustment, and vertical
size. C - Serviceman VCJ Cut-off
adjustments. These
include Red, Green
and Blue cut-off, red and blue drive, automatic fine
tuning (AFT), RF AGC (RF gain
control), horizontal center,
beam limit,
etc. S - Serviceman Options
Adjustments. These involce the PIP and
clock. M - Serviceman MTS
(Stereo/SAP) adjustments. CHK
- the mode you first
entered. Normal picture
and sound, lets you check things over
and still have a hotkey
into the service menu. There is
one more
adjustment that isn't in the
five modes, it's global. When in either the
yellow or red CHK mode,
you can press RECALL on the
remote
control to enter the purity
field check mode. This lets you select a pure
white, red, green, or blue
screen. A good thing to walk
away
from if you just want to
temporarily freak out the floor manager, but
it will be fixed as soon as
the TV is turned off. Oh well. To
get out of Serviceman
mode, press ACTION and
POWER on the receiver simultaneously
for at least 2 seconds. The
TV will momentarily shut off
and then comes
back on.
------------------------------- --------------------------- PE77U /
PX75U / PX77U /
PZ700U / PZ750U
PD60U / PX6U / PX60U /
PX600U
PD50U / PX50U / PX500U : * Hold down the {VOL -}
button ON THE PLASMA TV.
* Press the {RECALL}
button 3 times on the
remote.
* The Service Menu will be displayed.
* Use {1} {2} on remote to
navigate main menu
items.
* Use {3} {4} on remote to
navigate sub-menu items. * Use {VOL+} {VOL -} on
remote to change item
value.
* Write down all values
before changing
Once a value is changed, THE CHANGE IS MADE.
* Power off to exit service
mode and save.
-------------------------------
-------------------------- PA25UP /
PD25UP / PX25UP : * Using the remote
control:
* Press the {MENU} button.
* Set "Antenna A" to
"Cable".
* Select "Timer" menu and set sleep timer to 30 min.
* Press {OK} twice to exit
menus.
* Tune to channel 124.
* Press and hold {VOL -}
button ON THE PLASMA TV. "CHK" appears in on top-
left corner followed by 5
letter/numbers
(which are the cumulative
hours in hex numbers) * While
the "CHK" is displayed, press the {OK}
and {VOL+} buttons
ON THE TV simultaneously
to toggle between Modes: Red
"CHK" for Serviceman-
Yellow "CHK" for Aging * Press the {POWER}
button on the remote to
select one of the six
Serviceman Adjustments
Modes. A. MTS ADJUSTMENT
B. CLOCK ADJUSTMENT C. VIDEO ADJUSTMENT
D. HDEF ADJUSTMENT
E. VDEF ADJUSTMENT
F. DAF ADJUSTMENT G. OTHER
ADJUSTMENT * Press {CH+} {CH
-} on the remote to select the
settings
on each of Service
Adjustment Modes. Write
down the original
values before modifying anything.
It's easy to erroneously
adjust the wrong item. * Press
{VOL+} {VOL -} on
the remote to change
values. * Press the {POWER}
button on the TV to exit
the service menu.
-------------------------------
-------------------- PA20UP /
PX20UP : * Using the remote control:
* Press the {MENU} button.
* Press "Setup" menu.
* On "Mode" menu, select
"Cable" * Select "Timer" menu
and set sleep timer to 30 min.
* Press {ACTION} twice to
exit menus.
* Tune to channel 124.
* Press and hold {VOL -} button
ON THE PLASMA TV. "CHK" appears in on top-
left corner followed by 5
letter/numbers
(which are the cumulative
hours in hex numbers) * While
the "CHK" is displayed, press the
{ACTION} and {VOL+}
buttons
ON THE TV simultaneously
to toggle between Modes: Red
"CHK" for Serviceman - Yellow "CHK" for Aging *
Press the {POWER}
button on the remote to
select one of the six
Serviceman Adjustments
Modes. A. MTS ADJUSTMENT B. CLOCK ADJUSTMENT
C. VIDEO ADJUSTMENT
D. HDEF ADJUSTMENT
E. VDEF ADJUSTMENT
F. DAF ADJUSTMENT G. OTHER
ADJUSTMENT * Press {CH+} {CH -} on the
remote to select the
settings
on each of Service
Adjustment Modes. Write
down the original values before modifying
anything.
It's easy to erroneously
adjust the wrong item. * Press
{VOL+} {VOL -} on
the remote to change values.
* Press the {POWER}
button on the TV to exit
the service menu.
-------------------------------
---------------------- PANASONIC LCDs / CRTs /
RPTVs : * Hold down the {VOL -}
button ON THE TV.
* Press the {RECALL}
button 3 times on the
remote. * The Service Menu will be
displayed.
* Use {1} {2} on remote to
navigate main menu
items.
* Use {3} {4} on remote to navigate sub-menu items. *
Use {VOL+} {VOL -} on
remote to change item
value.
* Write down all values
before changing Once a value is changed, THE
CHANGE IS MADE.
* Power off to exit service
mode and save. Model
PT45LC12: 1. Press and hold Vol
Dn on center panel and press
recall button on remote
until Work Mode is
displayed on screen.
2. Press and hold Vol Dn on TV
and Swap button button on remote until
Factory Adjust is displayed
on the screen
3. Use Channel Dn button
to select Digital and press the
Action button. -------------------------------
------------------------ PANASONIC
PROJECTORS : 1.
* Press the {MENU} button.
* Go to "Options" menu.
* Highlight "OSD". * Then press and hold the
{ENTER} button, until the
Service Menu is
displayed.
* Press the {MENU} button
to exit. 2. # Turn the Projector on.
# Press the {POWER}
button.
# A "Power Off"
confirmation will come up on
screen. # Then press {LEFT} {UP}
{DOWN} {UP} {DOWN}
& {ENTER} buttons. # The
Service Menu will be
displayed.
# To exit, turn the Projector Off.
-------------------------------
--------------------------- PLASMAS
8UK / 9UK: * Hold down the
{VOL -}
button ON THE PLASMA DISPLAY.
* Press the {STATUS}
button 3 times on the
remote. (Status button is the
one
above Setup button) * The Service Menu (CAT)
will be displayed.
(CAT = Computer Aided
Test Menu) * Use the cursors
keys on
the remote to select a mode.
* And press the Action
key {} to access the menu.
* To exit each mode, press the
{R} button.
* To exit the CAT menu, press the {STATUS} button.
* Press {POWER} button on
the Plasma to exit the
service mode.
-------------------------------
------------------------- PLASMAS 3UY / 4UY /
5UY / 6UY / 7UY: * Hold down
the {VOL -}
button ON THE PLASMA
DISPLAY.
* Press the {STATUS} button 3 times on the
remote. (Status button is the
one
below Power button)
* The Service Menu (CAT)
will be displayed. (CAT = Computer Aided
Test Menu) * Use the cursors
keys on
the remote to select a
mode.
* And press the Action key {} to access the menu.
* To exit each mode, press the
{R} button.
* To exit the CAT menu,
press the {STATUS} button.
* Press {POWER} button on the Plasma to exit the
service mode.
-------------------------------
--------------------------- Philips
Magnavox # Press {0} {6} {2} {5}
{9} {7} {INFO+} on the remote.
or
# Press {0} {6} {2} {5} {9}
{7} {STATUS} on the
remote. or
# Press {0} {6} {2} {5} {9} {7} {MENU} on the remote.
or
* Press {0} {6} {2} {5} {9}
{6} {INFO+} on the remote. or
* Press {0} {6} {2} {5} {9}
{6} {STATUS} on the remote.
or
* Press {0} {6} {2} {5} {9} {6}
{MENU} on the remote.
or
* Press {0} {6} {1} {5} {9} {6} {MENU} on the remote.
or
* Press {0} {6} {1} {5} {9} {7}
{MENU} on the remote.
or
* Press {1} {6} {2} {5} {9} {6} {MENU} on the remote.
or
* Press {1} {6} {2} {5} {9} {6}
{STATUS} on the
remote. * Turn the TV off to
exit the Service Menu.
-------------------------------
--------------------------
* With the TV off: * Press {0} {6}
{2} {5} {9}
{6} {STATUS} on the remote. * Turn the TV off to
exit
the Service Menu.
-------------------------------
-------------------------- Models
15MF605T/17, 20MF605T/17,
15MF500T/37: To Factory Mode:
Step 1 : Select the source
"PC" and then turn off
LCD-TV.
Step 2 : [Push "power " button and then push the "VOL-
" and "VOL+"
buttons at the same time
immediately and hold it]
about five seconds then
release all buttons. Press "menu"button and bring
up factory mode
indication
-------------------------------
--------------------------- PIONEER
PDP-4214 * Press the {INPUT} button
on the remote.
* The input list will come
up.
* Then press the {0} {9}
{1} {7} buttons on the remote. * To exit, press the {EXIT}
button on the remote. You can
also press the
back button when you
are
in each category to get back to the main menu.
-------------------------------
-------------------------
4th / 5th / 6th / 7th
GENERATION MODELS * Make
sure the Plasma and the Media Box are in
standby.
* Using the remote
control:
* Press {DISPLAY} button (just
press, do not hold) and wait 3 seconds.
* Press {LEFT} {UP} {LEFT}
{RIGHT} {POWER} buttons.
* The Plasma will turn on
with the "Information" page
displayed. * Press {MUTE} to move
through the levels of
menus: INFORMATION
FUNCTION CHECK
COMMON ADJ
OPTION INITIALIZE * Press the {DOWN}
button
to move through
individual menus.
* To exit, power it down.
------------------------------- ----------------------- 3rd
GENERATION MODELS * Power
Down at the
panel.
* Hold down {INPUT} &
{VOL+} buttons on the panel.
* Turn on the Plasma at the
panel.
* The service menu will
come up.
* Scroll down using the arrow keys.
* To exit, power it down.
-------------------------------
----------------------------- RCA GE
Proscan 1. * Turn the TV off.
* Press simultaneously the {MENU} {VOL -} {CH -}
buttons for about 8-10
seconds.
* The TV will turn on with the
Service Menu
displayed. * Press the {POWER}
button to exit. 2.
* Turn the TV off.
* Press and hold the {VOL
-} & {CH -} buttons on the
TV. * Release both buttons when
the green power
light comes on.
* The TV will turn on with
the Service Menu
displayed. * Press the {POWER} button to
exit. 3.
To enter service mode,
push and hold the {MENU}
button on the set.
While holding, press and release the {POWER} button,
then press and release the
{VOL +} button. You will now
have some
information on the screen:
"P0 V0" To actually be able to change these values, you
must push {VOL +} on the
remote so the information
reads V76. Then pushing
on the Channel +/- will change
the "P" value. P1 - 3 are error codes. If
there is a problem with
the set that can be self-
diagnosed, the "V" will
report the code. These
codes are available in the RCA repair manual. P4 - 7 control
the
horizontal size, shift,
vertical size and shift. 4.
On the front panel (FPA) of
the F38310, simultaneously and
quickly press the {CH -} &
{DIRECTV} buttons. If
successful, you should
have displayed on the
bottom of the screen: Version Number: XX.XX P:0
V:0
(Note: Modifications to the
parameters and values
can be performed using
the remote at this point. The remote must be in TV
mode. To be sure, cover
the IR bulb on the remote and
depress the {TV}
button, then you can use
the remote for adjustments.)
Before adjustments can be
performed, you must enter the
password code
to enable the FPA (or
remote) for access. Use the {VOL +) button to
change V:0 to V:76. Once
this is done, you can now
change the parameter
setting for the desired
function. Be sure to write down the
V: settings PRIOR to
making changes in the event
you need to revert.
-------------------------------
------------------------------- - SAMSUNG 1. # Turn on the TV
on and
select the input that you
want to adjust.
# Turn the display off. # In
quick sequence on the remote press:
{MUTE} {1} {8} {2} {POWER}
buttons. # The TV will turn On
with
the Service Menu
displayed. ADJUSTMENT - TEST
PATTERN - SET OPTION
BYTE - FACTORY RESET # Select
the function and
use the {VOL+} button to
enter. # Save settings and exit
by pushing {MUTE} twice
then {POWER}. 2.
* With the TV in standby,
press the {INFO} {MENU}
{MUTE} {POWER} buttons on the remote.
* The TV will turn On with the
Service Menu
displayed.
* Press the {POWER}
button to exit the Service Menu. 3.
* With the TV in standby,
press the
{DISPLAY} {P.STD} {MUTE}
{POWER} on the remote.
* The TV will turn On with the Service Menu
displayed.
* Use the {CH+} {CH -}
buttons to select items.
* Use the {VOL+} {VOL -}
buttons to adjust. * Press the {POWER}
button to exit the Service
Menu. 4.
* With the TV in standby,
press the
{P.STD} {HELP} {SLEEP} {POWER} buttons on the
remote. or
{P.STD} {MENU} {SLEEP}
{POWER} buttons on the
remote.
* The TV will turn On with the Service Menu displayed.
* Use the {CH+} {CH -}
buttons to select items.
* Use the {VOL+} {VOL -}
buttons to adjust.
* Press the {POWER} button to exit the Service
Menu. 5.
* With the TV in standby,
press the
{SLEEP} {P.STD} {MUTE}
{POWER} on the remote. * The TV will turn On with the
Service Menu
displayed.
* Use the {CH+} {CH -}
buttons to select items.
* Use the {VOL+} {VOL -} buttons to adjust. * Press the
{POWER}
button to exit the Service
Menu. -------------------------------
-------------------------------
- SANYO 1. * Unplug the power cable.
* Press and hold the
{MUTE} button on the
remote control while
plugging the power cable
back into the outlet. * Keep pressing the
{MUTE} button until the TV
powers on with the
Service Menu displayed.
* Use the {CH+} {CH-}
buttons to select menus. * Use the {VOL+} {VOL -}
buttons to change
settings.
* Some menus might have
sub-addresses. Use the
numeric buttons {0} to {7} to adjust sub-item data.
* Press the {MENU} button
or turn the TV off to exit. 2.
* Unplug the power cable.
* Press and hold the {VOL
-} button on the TV while plugging the power
cable back into the outlet. *
Keep pressing the {VOL
-} button until
the TV powers on with the
Service Menu displayed. * Use the {CH+} {CH-}
buttons to select menus.
* Use the {VOL+} {VOL -}
buttons to change
settings. * Some menus might
have sub-addresses. Use the
numeric buttons {0} to {7}
to adjust sub-item data. * Press
the {MENU} button
or turn the TV off to exit.
SANYO PROJECTORS 1. * Press and hold the
{MENU} and {INPUT}
buttons on the projector
simultaneously for 5
seconds. or
Press and hold the {MENU} button for 20 seconds. * The
"S" mark appears
on the screen. * While the "S" is
being
displayed, press and hold
the {UP} and {DOWN} buttons on the projector
or
{SCREEN} button on the remote
for more than 3
seconds. * The Service Menu
will be displayed.
* Adjust service data
using the following
control buttons:
{OK} ................ A group number
increases. {MENU} ............ A group
number decreases.
{UP} ................ An item
number increases.
{DOWN} .......... An item number
decreases. {RIGHT} .......... An
adjustment value
increases.
{LEFT} ............ An
adjustment value decreases.
* To quit the service mode, press the "POWER
ON/OFF" button only once
on the projector or the
remote control. 2.
* Factory Menu Access:
Press and hold the {SELECT} and {INPUT}
buttons on the Projector
at the same time for about 10
seconds.
* The Factory Menu will be
displayed. * Service Menu Access:
Press and hold the {MENU}
and {INPUT} buttons on the
Projector at the same
time for about 10
seconds. * The Service Menu will be
displayed.
* Use the {UP} {DOWN} {LEFT}
{RIGHT} buttons to
move through menus and
change values. * To exit, turn the
Projector Off. 3.
* Press & hold the {MENU}
button on the Projector
for about 10 seconds.
* The Service Menu will be displayed. * Use the {UP}
{DOWN}
{LEFT} {RIGHT} buttons to
move through menus and
change values.
* To exit, turn the Projector Off.
-------------------------------
------------------------ SHARP 1. *
Unplug the TV
* Press and hold the {VOL
-} & {CH+} buttons. * While holding the above
buttons, plug in the TV.
* The TV will turn on with the
Service Menu
displayed. * There are 5
category menus:
Deflection - Signal -
Feature - Fix Value -
EEPROM
* Use {CH+} {CH -} buttons to
select a category. Note: Not all models will
have 5 categories.
Some will jump to 'Signal'
category. * Use {VOL+} to enter
the
category. * Use {CH+} {CH -} buttons
to select the item to be
adjusted.
* Use {VOL+} {VOL -} buttons to
adjust the
value. * Turn the set off to exit
the Service Menu. SHARP LCD
TVs : * While the LCD is on,
unplug the power cable.
* Then while pressing the
{INPUT} & {VOL -} buttons on the remote, plug the
power cable back into the
outlet.
* When it powers up you
will see a little "k" appear
in brackets. * Then on the TV, press
and hold {VOL -} & {CH -} down
and release.
* The Service Menu will be
displayed.
* Use {CH+} {CH -} buttons to navigate
* Use {VOL+} {VOL -} buttons to
adjust the
value.
* Turn the set off to exit
the Service Menu. SHARP PROJECTORS: 1.
* Press {INPUT} {UP}
{DOWN} {ENTER} {ENTER}
{MENU}
buttons on the back of the
Projector. * Now use the remote
control to navigate
through menus.
* To exit the Service Menu:
Press {INPUT} {UP}
{DOWN} {ENTER} {ENTER} {MENU}
buttons again on the back
of the Projector. 2.
* Press {UP} {UP} {DOWN}
{DOWN} {RIGHT} {LEFT}
{ENTER} buttons on the Projector
(or remote ?). * The Service
Menu will be
displayed.
* To exit, turn the
Projector Off. -------------------------------
-------------------------------
------ SONY # Using the remote
control:
# Turn the TV off.
# Press {DISPLAY} {5} {VOL +} {POWER ON} buttons.
or Press {DISPLAY} {5}
{POWER ON} buttons.
# The Service Menu will be
displayed.
# Use numbers {1} and {4} to select the item to adjust.
# Use numbers {3} and
{6} to adjust the value of
the data.
# Press {MUTE} then
{ENTER} to save new settings. # The words "WRITE" in
red will show up in the
upper right corner if
saved.
# Turn the TV off to exit the
service menu. SONY PROJECTORS : * Service Menu :
* Using the remote control
* Press {ENTER} {ENTER}
{UP ARROW} {DOWN
ARROW} {ENTER}.
* Then {UP ARROW} when it asks: "Do you want to
enter the Service Mode?". *
Factory Mode :
* Using the remote control
* Press {ENTER} {ENTER}
{LEFT ARROW} {ENTER}. * Then {UP ARROW} when
it asks: "Do you want to enter
the Factory Mode?". * Any
additional menus
usually pop up under the
main INFORMATION menu. -------------------------------
---------------
* Access "Menu" and make
sure "Status" is On.
* Exit the "Menu". * Service
Menu : * Using the remote control
* Press {ENTER} {ENTER}
{UP ARROW} {DOWN
ARROW} {ENTER}.
* Select "Yes" when it asks: "Do
you want to enter the Service Mode?". *
Factory Mode :
* Using the remote control
* Press {ENTER} {ENTER}
{LEFT ARROW} {ENTER}.
* Select "Yes" when it asks: "Do you want to enter
the Factory Mode?".
-------------------------------
---------------------- SYLVANIA *
Press {0} {6} {2} {5} {9}
{7} {INFO+} on the remote. or
* Press {0} {6} {2} {5} {9}
{7} {STATUS} on the
remote. or
* Press {0} {6} {2} {5} {9}
{7} {MENU} on the remote. or
* Press {0} {6} {2} {5} {9}
{6} {INFO+} on the remote. or
* Press {0} {6} {2} {5} {9}
{6} {STATUS} on the
remote. or
* Press {0} {6} {2} {5} {9} {6}
{MENU} on the remote.
or
* Press {0} {6} {1} {5} {9}
{6} {MENU} on the remote. or
* Press {0} {6} {1} {5} {9} {7}
{MENU} on the remote.
or
* Press {1} {6} {2} {5} {9}
{6} {MENU} on the remote. or
* Press {1} {6} {2} {5} {9} {6}
{STATUS} on the
remote.
-------------------------------
---------------- * With the TV off: * Press {0} {6}
{2} {5} {9}
{6} {STATUS} on the
remote. * Turn the TV off to
exit
the Service Menu. -------------------------------
-------------------- THOMSON 1.
* With the TV in standby:
* Press and hold the {VOL
-} & {PRG -} buttons on the
TV. * Keep both buttons pressed
until the TV turns
On with the Service Menu
displayed.
* To exit, turn the TV Off. 2.
* While the TV is On, press the {POWER} button on the
remote control to put TV
in standby.
* Turn the TV Off using the
{POWER} button on the TV.
* Using the buttons on the TV:
* Turn the TV On while
pressing the {PRG -} &
{VOL -} buttons * The Service
Menu will be
displayed. * To exit, turn the TV Off.
-------------------------------
----------------------- TOSHIBA 1.
# Turn the TV on.
# Press the {MUTE} button
three times on the remote. # Press the {MUTE} button
again on the remote and hold.
# Then press the {MENU}
button on the TV's front
panel.
# Release both buttons # There should be a letter "S"
on the upper right of
the screen.
# Press the {MENU} button
on the TV's front panel
again. # You are now in Service
Menu.
# Use the {CH+} or {CH-}
buttons to select the item.
# Use the {VOL+} and {VOL
-} buttons to adjust the value. # Turn the set off to exit
the Service Menu. 2.
* Turn the TV on.
* Press and hold the
{VOL-} button on the TV.
* Press and hold the {9} button on the remote. * The
Service Menu will be
displayed. * Use the {CH+} or
{CH-}
buttons to select the item.
* Use the {VOL+} and {VOL -} buttons to adjust the
value.
* Turn the set off to exit the
Service Menu.
-------------------------------
--------- TOSHIBA LCD's : * Press the {MENU} button
on the remote.
* Highlight the "Picture"
icon.
* Press the {9} {3} {0} {1}
buttons on the remote control. * The Service Menu will be
displayed
with the following Modes:
"Options" - "Adjustments"
- "Selections" * Use the {OK}
button to access and
navigate through these
Modes. * To change values use
{VOL +} {VOL-) {P+} {P-}
* To exit, press the {MENU}
button. -------------------------------
------------------------- ZENITH 1.
Service Menu #1 Press and hold
the
{MENU} button on the
remote and the {MENU} button on the
TV at the same time,
until the first Service Menu is
displayed. * Service Menu #2
Repeat the above
sequence: Press and hold the
{MENU} button on the
remote and
the {MENU} button on the TV at
the same time,
until the second Service Menu is displayed. 2.
* Press and hold the
{MENU} button on the
remote
and the {MENU} button
on the TV at the same time * If a password screen
comes up: Press and hold the
{MENU} button on the
remote
and the {MENU} button
on the TV at the same time again, until the Service
Menu is displayed. 3.
* Press and hold the
{MENU} button ON THE
REMOTE
until a 4-digit password screen is displayed. * Then try
any of the
following codes to
access the Service Menu: {0} {0}
{0} {0}
{7} {7} {7} {7} {8} {7} {4} {1} 4. * Press and hold
the
{MENU} button ON THE
REMOTE.
(The menu on the screen
will disappear) * Now Press and hold
the {MENU} button ON
THE PANEL.
* Keep both buttons
pressed until the Service
Menu is displayed, then release the 2 buttons. * Using the
remote
control buttons: {MENU} =
Toggles
between two menu
pages. {UP} {DOWN} = Selects
the item for adjustment.
{LEFT} {RIGHT} = Varies the
value
{POWER} = Exit service
mode and saves adjustments made. 5.
* Turn the TV on.
* Hold down the {MENU}
button on remote until
the on-screen menu
disappears or "Welcome Message" appears then
release the {MENU}
button and within two
(2) seconds press the
following five buttons: {9} {8}
{7} {6} {ENTER} or
{9} {8} {7} {6} {DISPLAY} * The
Service Menu will
be displayed. * Using the
remote
control buttons: {MENU} = Toggles
between two menu
pages.
{UP} {DOWN} = Selects
the item for adjustment.
{LEFT} {RIGHT} = Varies the value
{POWER} = Exit service
mode and saves
adjustments made